CO2 Equipment

CO2 Boost Bucket - Carbon-dioxide gas (CO2), absolutely essential for plant growth, quickly becomes depleted in closed grow room environments. Increasing photosynthesis levels directly results in faster growth and substantially larger harvests. This revolutionary new products threatens to put all other forms of carbon-dioxide production out of business. Inside the CO2 Boost Bucket, specially formulated mushroom spores slowly eat away at a patented substrate over several months, generating CO2 gas in abundance. An air pump on a timer ensures that the gas reaches your plants only when the lights are on.

Green Air CO2 Generators - When done correctly, gardeners using carbon dioxide enrichment will dramatically increase plant growth rates, and with Green Air CO2 Generators it can be six times less expensive than using bottled CO2 injection systems. These CO2 Generators burn propane or natural gas to produce the CO2 by-product. LP models use an easy-to-fill 20-pound bottle (not included) and natural gas units are attached directly to permanent gas piping. Generators have solenoid activation, feature an on/off switch on the face of each model, and a black anodized aluminum housing to prevent corrosion and rusting.

C.A.P. CO2 Generators - Growers can supplement carbon dioxide (CO2) and maximize their crop's growing potential in the garden or greenhouse via the CO2 Generators from Custom Automated Products (C.A.P.). Generators are safe and easy to use and come standard with a tip-over shut down switch to turn off the main burners if units are tilted more than 35 degrees. GEN-1 and GEN-2 models are available as liquid propane (LP) or natural gas (NG) with either a standard or electric ignition. Rust-resistant generators are manufactured in the USA and feature UL-listed components.

Active Air CO2 Injection Systems - Often referred to as: "Bottle Systems" because they utilize CO2 tanks ("Bottles") that are readily available from welding supply stores (not included with system). Deliver growth-boosting CO2 with this user friendly, easy to operate system. With its programmable timer, it will automatically maintain ideal CO2 levels for optimum growth.

Green Air CO2 Monitors - CDMC-6 & CDMC-7 - Both the CDMC-6 and the CDMC-7 feature the Carbon Dioxide Digital Sequencer (CDDS-2) with a single patch cord and is an automatic and programmable CO2 control system. The CDMC-7 utilizes the CDM-7001 monitor that is battery powered and portable so you can perform instantaneous spot checks of CO2 levels in different areas. The CDMC-6 has all the same quality features of the CDMC-7 except it utilizes the CDM-6000 monitor which doesn't have the hand-held portability of the CDM-7001. With these units you can accurately control your CO2 levels to within 10 PPM (parts per million). Both these great units feature 0 to 2000 PPM read out with a linear output signal which can be used to interface with a computer or other interface device.

Custom Automated Products (C. A. P.) CO2 Monitors - PPM-3 & Fuzzy Logic - PPM-3 is easy-to-use, affordable, and is a tool that any indoor gardener can use to maintain CO2 levels derived from generators as well as bottled systems. This unit can be used as an independent monitor/controller or coordinated with an exhaust/cooling cycle. The Fuzzy Logic CO2 Controller is a "smart" controller that maintains CO2 levels by bringing levels up without overshooting the desired level. Gardeners can also connect the unit to an environmental or temperature controller so CO2 production is disabled when exhaust fans are running. This controller can run both compressed CO2 and gas-burning generators.

C. A. P. Photo Controllers - The PTC series of photo controllers Made By Custom Automated Products, are perfect when you need to turn something on only during daylight hours or only on at night. A photocell senses whether it is day or night, and turns the device plugged into it on or off depending on which model you are using. The PTC-1 turns on during the day. The PTC-2 turns on during the night.

Harvest-Master CO2 EASi Unit - As soon as CO2 Easi is switched ON, it learns how CO2 enrichment works in your room, including whether you use bottle or burner. Continuous learning and adjustment all day, every day. CO2 EASi will understand, calculate and predict enrichment operations for optimum growth.