| Green Air
CT-DH-3. While the CT-DH-3 has
many applications, it was primarily developed to be used with CO2 equipment
and exhaust type fans. Internal sensors will allow a 7 degree
temperature comfort zone and a 7% humidity (differential) between the time
the fans go "OFF" and come back "ON" again. Temperature
or humidity raise will activate the right hand outlets and deactivate the
left hand outlets. The CT-DH-3 has an internal relay that
automatically switches power from the left side (CO2 outlets) to the right
side (Exhaust Outlets) of the unit when either temperature, humidity, or
both are in excess of the dial settings.
Plug the controller into a power surge protector to
protect your valuable equipment, and then plug the surge protector into a
110 wall outlet. Set the temperature and humidity to the desired settings.
The left side of the controller in normally in the "ON" position and is able
to activate CO2 equipment as needed.
| Green
Air Synchronized Cooling Thermostat/Dehumistat/4 Outlets |
Model CT-DH-3 |
$219.95 |
|
| Model CT-DH-3P w/
light activated photosensor |
$274.95 |
|
|
